|
Hatedblacklabel (November 30, 1999 at 12:00 am)
I just took apart my tippmann custom pro e, I bought on ebay I took it apart to first check out why the trigger wouldn't work, figured out it was the battery. Then to figure out how to change the shooting modes, figured out its not a button like i read, it is a screw that turns semi/off/3 burst/off/auto/off/response/off/turbo/off. its a pain in the ass to switch, then I decided to take it apart like this video, mistake at first, this gun is much harder with the electronic hardware. Not too hard.
noonan8694 (November 30, 1999 at 12:00 am)
i cant get the front sight in like it is wierd but it just dosent go in what should i do
ncscmassive (November 30, 1999 at 12:00 am)
i had a tippman and i sent it awya to my freind in birmingha and put in click pins instead of bolts. now its soo esy to take apartand i don need any tools also the clickpins never come out as u have to put something like the end of a biro in them to make them open
neowbee91 (November 30, 1999 at 12:00 am)
this is a darn useful video clip!=)
ExplosiveWeaponForum (November 30, 1999 at 12:00 am)
go to the tippmann web sight for the front sight i used some hot glue to keep the spring from flying out. i have a jewlry box i keep all my spare parts in i also have the things you clean your ears out with wo reach on the inside of the gas tube to clean it out if you want to see my tippmann just look on our profile
rockinbass01 (November 30, 1999 at 12:00 am)
ok i have some questions first when i dissasembled my trigger mechanism blew apart but i fixed it i had to make a new spring from a pen spring the little black thing the trigger hits it sits to far back for it to hit it so i jammed it with some paper (prety stupid i know but i need to use it tomorrow) then i messed up the sight.. can you make a vid of how to put the site in? also where can i buy the parts for it and the spring for the black thing
Nby21Blog (November 30, 1999 at 12:00 am)
it's a fantastic gun, lightwieght, very very reliable (the ACT does it's job). But today i had a problem. I don't know if it was the wind or that i had too much pressure in the tank, but my balls went everywhere. Which could be the problem? I've tried using a longer barrel (3x stock), but still accuracy not so good. I think it's the wind because i never experienced so unnacuracy. Still it's the best gun out there (there are better ones i gto to admit, but the 98 gives u the most bang 4 ur buck)
KRASHARPSHOOTER (November 30, 1999 at 12:00 am)
Yep, either a cheap rubber squeegee or a fuzzy battle swab will work fine.
obomans (November 30, 1999 at 12:00 am)
do i need a squeegee thingy
KRASHARPSHOOTER (November 30, 1999 at 12:00 am)
Water and towels to wipe off the paint.
Marker Oil or Pure Lube to lubricate the o-rings. I use Pure Lube which you can buy from Actionvillage. com or pureexcessindustries. com. Pure Lube is great because it works great on O-rings and high friction parts. I also use Gold Cup Marker oil.
Teflon Tape can be picked up at a hardware store or Walmart. Just ask someone in the pluming isle for it. |
